Model JB-300B impact testing machine

1. High Value 2. Good quality 3. Easy to operate 4. Two years warranty

Main Feature:

Model JB-300B impact testing machine is the use of pendulum impact test before and after impact the remaining potential energy potential energy difference shown in the dial on the way, get the test patterns of the absorbed energy.

The device works by Charpy impact before and after impact the impact of potential energy to detect the difference between the absorbed energy, the material toughness. Display for the dial pointer display; the equipment operating on semi-automatic control, in the course of the experiment electric Jan swing, impact, and the use of thrust energy remaining after the sample can be placed automatically Young. Easy operation, high efficiency, in a continuous pattern of doing impact test, the better to reflect its superiority.

Applicable Industry:

This machine is suitable for mechanical metallurgy, aerospace, universities, research institutes and other areas used to measure the impact toughness of metallic materials and metal materials in the dynamic load shock resistance. Widely used in scientific research units.

Usage Range:

Mainly larger black metal toughness, especially castings, alloy steel and its wayward absorbed energy and impact tests.

Main technical indicators:

1. Maximum impact energy: 150J 300J two block

2. Dial the scope and scale division value:

Energy range	0~300J	0~150J
Each small cell division value	2J	1J

Pendulum torque

Charpy impact energy	300J	150J
Pendulum torque	160.7695N.m	80.3848N.m

4. Pre-Yang pendulum angle: 150 °

5. Pendulum center to the impact point (test center) distance: 750mm

6. Impact speed: 5.2m / s

7. Style bearing span: 40 ± 1mm

8. Bearing style tip radius: 1-1.5mm

9. Style bearing support surface inclination: 0 °

10. Impact of edge radius: 2-2.5mm

11. Impact of blade angle: 30 °

12. Impact of blade thickness: 16mm

13. Pattern size: 10 × 10 × 55mm

14. Test weight: about 450kg

15. Test machine size: 2124 * 600 * 1340mm

16. Power supply: three-phase four-wire 50HZ380V

17. Main motor power: 380v180W

(B) the working conditions

a. at room temperature 10-35 º C range;

b. relative humidity less than 85%;

c. non-corrosive medium surrounding environment;

d. thickness of not less than 300mm installed in concrete foundations or fixed on the basis of greater than 880 kg;

e. the base station installation of the horizontal datum transferred to 0.2/1000 or less degree;

Working conditions:

a. At room temperature 10-35 º C range;

b. Relative humidity less than 85%;

c. Non-corrosive medium surrounding environment;

d. Thickness of not less than 300mm installed in concrete foundations or fixed on the basis of greater than 880 kg;

e. Base station installation of the horizontal datum transferred to 0.2/1000 or less degree;

Structural profile:

JB-300B impact testing machine consists of the following components:

(1)   body; (2) to take place institutions; (3) hanging off put `body; (4) Automatic Yang put signal devices; (5) dial instructions; ( 6) pendulum; (7) protection devices; (8) electrical control parts.

Standard accessories:

1. Host: one.

2. Pendulum: specification, put on a large 300J, a small pendulum 150J.

3. Span model: size, L = 40.

4. Specimen on the block: size, L = 40 (VU) type.

5. Removal device, impact testing machine special tools.

6. Stay wrench: size, S = 30.

7. Hexagonal wrenches: size, S = 14.

8. Angle the bolt: size, M16 × 300. A set of four mounted on the tower nuts.

9. Tower nuts: four

10. Jaw (including bracket): the number of a pair. Note, has been installed on the host.

Model JB-300B impact testing machine